T901 Antifoam/Antifoaming Additive
Methyl Silicone Oil
For Use in All the Lubricating Oils Which
Require Anti-foam Index
Application
T901antifoam/ antifoaming additive is primarily used in internal combustion engine oils, gear oils and hydraulic oils. It can also be used in fermentation industry, manufacturing the thermo plasticity rubber. The product is used in demoulding for rubbers, plastics and casting industry, and is used for waterproof, anti-mold and insulation. This is colorless, odorless and non-toxic. It can reduce the generation amount of the foams in the lubricants. The product can improve the liquidity of the oil film on the surface of the foam, making the oil film getting thinner and accelerating the breaking of the foam rising to the surface of the oils. T901 has the good compatibility with various kinds of the additives. But in the acid medium, it has the poor persistance to eliminate the foams, and the adding method has great effect on the performance of T901, and it has great effect on the gas emission.
Key Performance Benefits
1. Excellent anti-foam performance with a little of the dosage
2. Good chemical stability
3. Having serious impact on gas release
4. Prolonging the operation life of lubricating oils
5. Easy to use, low cost, reliable quality
Typical Value
Flash Point (open cup), °C ≥303
Solidifying Point, °C ≤-52
TBN, mg KOH/g ≤0.02
Dielectric Constant ≥2.6
Recommended Dosage
The dosages of T901 Antifoam/ antifoaming additive generally recommended to blend lubricants are 5-20 ppm.
Packing: The product is packed in 170Kg/drum.
Storage: Keep the temperature not higher than 75°C. For long-term storage, the suggested temperature is lower than 45°C.
